18
Hangar 9 Pulse 125 ARF Assembly Manual
Step 12
Insert the brass pushrod connector in the hole. Use the
nylon backplate to secure the connector to the carburetor
arm.
Step 13
Secure the engine to the mount using four 4mm x 25mm
socket head screws, four 4mm washers and four 4mm nylon
locknuts. The washers will be on the bottom side of the
mount between the locknut and nylon mount.
Step 14
Thread a servo mounting screw into each of the holes in
the radio tray. This will cut the threads for the screws in
preparation of the next step.
Step 15
Place 2–3 drops of thin CA in each hole to harden the
surrounding wood. This harder surface will make the screws
less likely to vibrate loose.
