handi quilter HQ Pro-Stitcher User Manual Download Page 88

Page: 88 / 94

www.HandiQuilter.com/ProStitcher

07/23/12

Settings Menu

8.7

Communication

The

Communication

sub-menu enables the quilter

to manually establish communications with either

the quilting machine or the HQ Pro-Stitcher motors

(

Figure 8.11

)

Switch to Handlebar Control

To stop communications between the Pro-Stitcher

and the quilting machine, press the

Switch to

Handlebar Control

button (

Figure 8.23

HQ Sixteen quilting machines will not allow handle

control while the Pro-Stitcher is communicating

with the quilting machine, so this button will

need to be pressed to allow the quilter to operate

the quilting machine manually from the handles.

This button is also conveniently located at the top

left-hand corner of the screen for the HQ Sixteen

version.

For HQ

Avanté and HQ

Fusion quilting

machines, handlebar control is always available, so

this button simply prevents any communication

from the Pro-Stitcher computer from being

processed by the quilting machine. To return to

normal Pro-Stitcher control, press the button (which

has now become a

Connect Pro-Stitcher

button)

again to reestablish communication between the

Pro-Stitcher and the quilting machine.

Reconnect Motors

If the Pro-Stitcher motors ever become unplugged

or disconnected from the computer, it may be

necessary to use the

Reconnect Motors

button to

reestablish communications between the

Pro-Stitcher computer and the motors. If the

Pro-Stitcher computer cannot communicate with

the motors for any reason, it will be indicated

by a lightning bolt icon at the top right-hand

corner of the screen. Pressing the lightning bolt

button in the top right-hand corner of the screen

will perform the same function as the

Reconnect

Motors

button.

Figure 8.11

Figure 8.12

Summary of Contents for HQ Pro-Stitcher






























































































Search results

Summary of Contents for HQ Pro-Stitcher

Reviews:

handi quilter HQ Pro-Stitcher, User Manual, Page: 88 / 94

Search results

Summary of Contents for HQ Pro-Stitcher

Reviews: