handi quilter HQ Pro-Stitcher User Manual Download Page 87

Page: 87 / 94

HQ Pro-Stitcher User Manual

07/23/12

8.6 Settings Menu

General

Thread Break Sensor On/Off

On HQ

Fusion machines only, a message is sent

to the HQ Pro-Stitcher if the thread break alarm is

triggered. The

Thread Break Sensor

option tells the

Pro-Stitcher whether to respond to or ignore the

message. If the button is turned on, the Pro-Stitcher

pauses when a thread break message is received. If

it is off, the Pro-Stitcher ignores the message and

continues stitching

(

Figure 8.9

)

Show/Hide Design While Panning or

Zooming

If this button is not selected, the design will be

temporarily hidden while panning and zooming.

This minimizes the amount of delay that occurs

while zooming or panning with large designs. If it

is selected, the design remains on the screen during

zooming and panning

(

Figure 8.10

)

Figure 8.10

ADVANCED MENU

Verify Settings Before Quilting

If this button is selected, a pop-up box appears

before stitching a design. The pop-up box contains

all the current settings so the quilter can verify that

everything is set up properly before stitching. This

option can be turned off if desired.

Figure 8.9

Summary of Contents for HQ Pro-Stitcher






























































































Search results

Summary of Contents for HQ Pro-Stitcher

Reviews:

handi quilter HQ Pro-Stitcher, User Manual, Page: 87 / 94

Search results

Summary of Contents for HQ Pro-Stitcher

Reviews: