23
HNC3 825 / HNC3 825 perform
Technical information
Data
Value Unit
Ø tool max.
36 mm
Ø tool shaft max. HFM 1000 PV-WS
8 mm
Ø tool shaft max. HFM 1000 PV-ER
10 mm
Ø tool shaft max. HNC3 825 perform
16 mm
●
Router tools with a diameter greater than 16 mm must adhere to the stand-
ards DIN EN 847-1:2018-01 and DIN EN 847-2:2018-01.
●
Follow the operating instructions of the tool manufacturer.
●
Select the correct tool and use the recommended rotation speed for the
respective material.
●
Soldered tools and tools that have a diameter larger than 8 mm may
only be used with protective housing.
Chapter 5.1.3 ‘Protective housing’
●
Single component tools with a diameter of up to 8 mm can be used without
a protective housing.
●
With the HNC3 825 machine variant, with a 43 mm EURO collet, the
customer is required to ensure the safe and proper usage of the motor or
electrical tool.
Rotation speed of the drive spindle
Data
Value Unit
HFM 1000
4,000 - 25,000 min
-1
HNC3 825 perform
6,000 - 24,000 min
-1
4.3
Operation and storage conditions
Data
Value Unit
Operating/room temperature
+5 - +40 °C
Storage temperature
-10 - +50 °C
Humidity (non-wetting)
90 %
Summary of Contents for HNC3 825
Page 78: ...78 Disposal...
Page 79: ......
