Hammer HNC3 825, Translation Of The Original Operating Instructions

Page: 45 / 80

45
HNC3 825 / HNC3 825 perform Setup and installation
Personnel:
● Trained machine operator
Protective equipment:
● Protective clothing
● Protective gloves
● Protective footwear
Material:
●
Cable ties
● Hose clamp
1. Connect the extraction hose to the machine extraction connector using a
hose clamp.
2. ● Standard extraction hood: Fasten the extraction hose to the guide on
the portal with cable ties.
● Perform extraction hood: Mount the extraction hood in such a way
(e.g. from the ceiling), that the extraction hose does not hang into
the processing area of the machine. When working, there must be no
pulling strain on the working head.
7.7 Connect electrics
● The electrical outlet must have the appropriate socket.
●
Before connecting or removing accessories, the machine must be switched
off.
Overview
1 2 3 4 5
Fig. 26: Machine connections at the front
1 PC-Port (25 Pin)
2 Emergency stop
3 Tool length measuring system
4 4th axis
5 AUX-Port