73
HNC3 825 / HNC3 825 perform
Maintenance
Belts are in good condition and the belt tension is correct. Belt
tension: 200 to 220 Hz
Belts are worn out, belt tension is wrong.
1
Fig. 56: Locking screws
1 Locking screws
1.
Loosen the four motor fixing screws (do not remove them).
Support the opposite side.
2.
Remove the old belt and dispose of correctly.
3.
Fitting a new belt.
4.
Move the motor with one hand away from the axis and then
fix the locking screws. The belt tension needs to be between
200 to 220 Hz.
6.
Screw the cover back on.
10.4 Check protective equipment
1.
Prepare the machine to operate.
2.
Switch machine on.
3.
Push the
[Emergency stop]
.
🡆
Stop machine movements.
🡆
Machine cannot be put into operation.
Summary of Contents for HNC3 825
Page 78: ...78 Disposal...
Page 79: ......
