Hammer HNC3 825, Translation Of The Original Operating Instructions

Page: 9 / 80

9
HNC3 825 / HNC3 825 perform Safety instructions
● If the personnel lack the necessary knowledge for working on or with the
machine, they must be trained. Responsibility for working with the machine
(installation, service, maintenance, overhaul) must be clearly defined and
strictly observed.
● Only those people who can be expected to carry out their work reliably may
be given permission to work on or with the machine.
●
Personnel must refrain from working in ways that could harm others, the
environment or the machine itself.
●
It is absolutely forbidden for anyone who is under the influence of drugs,
alcohol or reaction-impairing medication to work on or with the machine.
●
When appointing personnel to work on the machine, it is necessary to
observe all local regulations regarding age and professional status.
● The machine may only be operated by an adult, that is without mental
limitations or under the supervision of such a person.
● All operators must ensure that unauthorised persons are kept at a safe dis-
tance from the machine.
● Personnel are obliged to immediately report any irregularities with the
machine that might compromise safety to the operator.
2.4 Making changes and modifications to the machine
● In order to avoid potential hazards and to ensure optimum performance, no
modifications, alterations or changes may be made to the machine that have
not been explicitly approved by the manufacturer.
● All the pictograms, signs and labels affixed to the machine must be kept
visible, readable and may not be removed.
● Pictograms, signs and labels that have become damaged or unreadable
must be replaced promptly.
2.5 Work safety
●
Following the safety advice and instructions given in this manual can prevent
bodily injury and material damage while working on and with the machine.
●
Failure to observe these instructions can lead to bodily injury and damage to
or destruction of the machine.
● Disregard of the safety advice and instructions given in this manual as well
as the accident prevention regulations and general safety regulations appli-
cable to the operative range of the machine shall release the manufacturer
and their authorised representatives from any liability and from any compen-
sation claims.
2.6 Personal protective equipment
When using the machine, the operator must wear suitable personal protective
equipment, as there are machine elements or media that can be dangerous.