25
POST-ASSEMBLY
TO LIGHT THE MAIN BURNERS BY MATCH:
If the burner will not light after several attempts, the burner can be match-lit.
Tools: Match holder (hanging under right-side shelf)
Usage:
1.
Read instructions before lighting.
2.
Open the lid during lighting.
3.
Turn a control knob to the ignite position ( ) as shown in
Fig. 12
.
4.
Remove match holder from knot on side of base. Place a lighted match between the coils
on the end of the match holder and hold next to the burner to ignite as shown in
Fig. 12
.
If ignition does not occur in 5 seconds, turn the burner control knob OFF and contact
Consumer Affairs.
5.
For lighting the other burners, please repeat Steps 3 and 4.
Fig. 12
GRILL LIGHTING INSTRUCTION
Summary of Contents for OG01
Page 7: ...7 BEFORE YOU BEGIN GRILL PARTS DIAGRAM GRILL PARTS DIAGRAM ...
Page 16: ...ASSEMBLY ASSEMBLY STEPS STEP 5 Side Shelves Fig 5b 16 Fig 5c ...
Page 39: ...39 AVANT DE COMMENCER SCHÉMA DES PIÈCES DU BARBECUE ...
Page 48: ...ASSEMBLAGE ÉTAPES DE L ASSEMBLAGE ÉTAPE 5 Tablettes latérales Fig 5b Fig 5c 48 ...
