21
POST-ASSEMBLY
GAS CONNECTION
STEP 3:
After grill is completely assembled, make sure natural gas supply valve is “OFF” and
then connect natural gas hose to socket. Push sleeve back on socket and insert plug until
sleeve snaps forward, locking plug into socket. Be sure to leak-test these connections prior to
use.
• Never insert any foreign objects into the valve outlet. It may damage the valve and cause
a leak. Leaking gas may result in fire, explosion, heavy body injury, or even death.
• Do not use this grill until leak-tested.
• STOP and call the fire department if any leaks are detected.
• If you cannot stop a gas leak, close the NG source IMMEDIATELY and call the NG
supplier or the fire department.
VERY IMPORTANT:
TO DISCONNECT NG SOURCE:
1.
Turn all control knobs OFF.
2.
Turn natural gas source off fully (turn clockwise to the stop).
3.
Push sleeve back and pull plug out of sleeve.
w
WARNING
Natural Gas Supply
Supply Valve
Socket
Sleeve
Hose
Push Sleeve Back to Attach
NOTICE:
Please also follow the instructions attached to the natural gas hose assembly you
purchase.
Summary of Contents for OG01
Page 7: ...7 BEFORE YOU BEGIN GRILL PARTS DIAGRAM GRILL PARTS DIAGRAM ...
Page 16: ...ASSEMBLY ASSEMBLY STEPS STEP 5 Side Shelves Fig 5b 16 Fig 5c ...
Page 39: ...39 AVANT DE COMMENCER SCHÉMA DES PIÈCES DU BARBECUE ...
Page 48: ...ASSEMBLAGE ÉTAPES DE L ASSEMBLAGE ÉTAPE 5 Tablettes latérales Fig 5b Fig 5c 48 ...