7
1
Introduction
These Original operating instructions provide you with all the information you need for the
smooth operation of the Positioning clamping pin (hereinafter also referred to as Lifting
accessory).
The Original operating instructions must be read, understood and applied by all persons
assigned to the operation, maintenance, cleaning and troubleshooting of the Lifting
accessory. This applies in particular to the listed safety instructions.
After studying the Original operating instructions you can
–
operate the Positioning clamping pin in accordance with safety regulations,
–
maintain the Positioning clamping pin according to regulations,
–
clean the Positioning clamping pin according to regulations,
–
and take the appropriate action when a malfunction occurs.
In addition to the Original operating instructions, general, statutory and other binding
regulations on accident prevention and environmental protection of the country of use
must be observed.
The Original operating instructions must always be kept at the place of use of the
Positioning clamping pin.
1.1
Method of presentation
Texts in these Original operating instructions that require special attention are marked as
follows as a notice and as a direct warning of dangers:
1.1.1
Warnings pertaining to sections
Warnings pertaining to sections apply not only to a specific action, but to all actions within
a section.
Structure
SIGNAL WORD
Symbol for
more
detailed
explanatio
n of the
danger
Nature and source of the danger!
Possible consequence(s) in case of non-compliance!
–
Measure(s) to avoid the danger.
