2 Safety
2.1 Intended use
13
–
to use the Positioning clamping pin as a protective device or safety function,
–
to use the Positioning clamping pin as a traction element,
–
not to produce the installation sketch according to the specifications of the company
Erwin Halder KG,
–
to forget or squeeze in the sealing ring of the Positioning clamping pin,
–
to use defective or unsuitable accessories,
–
to operate the Positioning clamping pin if the functional components are deactivated,
manipulated or defective,
–
to operate the Positioning clamping pin while untrained persons are in the danger
zone,
–
to operate the Positioning clamping pin if they are not ready for operation or have
been modified,
–
to operate the Positioning clamping pin without instruction.
–
to use the Positioning clamping pin only inserted, without using locking via hexagon
socket,
–
to use the Positioning clamping pin for constantly rotating loads,
–
to use the Positioning clamping pin for lifting, holding or carrying persons,
–
to place objects on the Positioning clamping pin. Remove all objects that are on the
Positioning clamping pin.
Proper use also includes
–
the observance of all notices in the original operating instructions and the third-party
documentation,
–
noting that in case of an overhead or horizontal use, the fixture or the workpiece must
be secured against falling down before opening the Positioning clamping pin,
–
compliance with the inspection and servicing intervals,
–
the use of operating and auxiliary materials in accordance with applicable safety
regulations,
–
compliance with the operating conditions,
–
inspecting the Positioning clamping pin for visible defects or damage before each use.
The technical specifications given in the technical data must be observed without
exception.
Only use the Positioning clamping pin for their intended purpose, otherwise safe
operation is not guaranteed.
For all personal injury and damage to property resulting from improper use, the
operator of the Positioning clamping pin and not the manufacturer is responsible!
