2 Safety
2.8 Obligation of the operator
27
2.8
Obligation of the operator
The Positioning clamping pin are used in the commercial sector. The operator of the
Positioning clamping pin is therefore subject to the legal obligations for occupational
safety.
In addition to the safety instructions in these Original operating instructions, the safety,
accident prevention and environmental protection regulations valid for the area of
application of the Positioning clamping pin must be observed. The following applies in
particular:
–
The operator must ensure that the Positioning clamping pin are only used for their
intended purpose (see "2.1 Intended use
–
The operator must always make the Original operating instructions available in legible
condition and in full at the place of use of the Positioning clamping pin.
–
The operator must clearly regulate and define the responsibilities for installation,
commissioning, operation, maintenance and cleaning.
–
The operator may only allow persons to work on the Positioning clamping pin who
have reached the minimum legal age.
–
The operator may only allow sufficiently qualified and instructed personnel to work on
the Positioning clamping pin.
–
The operator must ensure that all employees who interact with the Positioning
clamping pin have read and understood the Original operating instructions.
In addition, he must demonstrably train the personnel at regular intervals and inform
them about the dangers.
–
The operator must provide personal protective equipment for the personnel and
ensure that it is used.
–
The operator must ensure that no persons work on the Positioning clamping pin
whose ability to react is impaired by drugs, alcohol, medication or similar.
–
The operator must ensure there is adequate lighting in the work area of the
Positioning clamping pin.
Furthermore, the operator is responsible for ensuring that the Positioning clamping pin
are always technically in perfect condition. The following therefore applies:
–
The operator must ensure that the servicing intervals described in these Original
operating instructions are adhered to.
–
The operator must have all components of the Positioning clamping pin checked
regularly for proper functioning and completeness.
–
The operator must regularly check that all safety and warning notices attached to the
Positioning clamping pin are clearly legible and remain permanently attached to the
Positioning clamping pin.
