2 Safety
2.5 Special danger warnings / residual dangers
18
2.5
Special danger warnings / residual dangers
2.5.1
Symbols used on the Lifting accessoryn
Observe the Original operating instructions
This symbol indicates that the Original operating instructions must be
observed.
CE marking
The CE marking on the product is the manufacturer's declaration that the
product complies with the essential requirements of the relevant European
health, safety and environmental protection legislation.
Keep all safety and danger information on the Positioning clamping pin in a
legible condition. Renew this information as necessary.
2.5.2
Dangers due to the fixture or workpiece falling down
WARNING
Risk of injury due to the fixture or workpiece falling down due to the
opening of the Positioning clamping pin!
Non-compliance can result in death or serious injury!
–
Please note that during operation an opening of the Positioning clamping
pin must be ruled out by suitable countermeasures.
–
During use or at work always wear the protective equipment necessary
for the work in question.
–
Make sure that the systems, machines and technical equipment on
which the Positioning clamping pin are used comply with the minimum
requirements of the EC Machinery Directive 2006/42/EC (if applicable)
and, in particular, have effective technical protective measures against
possible mechanical hazards.
