40
5
Assembly
The Positioning clamping pin are completely assembled by Erwin Halder KG.
5.1
Notes on hazards during assembly
WARNING
Risk of injury due to unsuitable assembly materials!
Unsuitable assembly materials can lead to serious injuries during
operation!
–
Only use the supplied assembly materials.
5.2
Preparatory measures
Before assembling the Positioning clamping pin, make sure that
–
Additional lighting equipment (hand-held lamps) is available for the work,
–
The assembly area is cleaned and dust-free,
–
The necessary tools are available for the assembly.
5.3
Choice of location of use
5.3.1
Necessary operating and maintenance areas
When selecting the location of use, take into account the ambient conditions (see
“3.3.2 Ambient conditions”).
When selecting the location of use, take into account the necessary operating
and maintenance areas.
The clearance at the Positioning clamping pin should not be less than 1000 mm
all round.
The operator must ensure there is adequate lighting in the location of use of the
Positioning clamping pin.
