4 Transport and storage
4.3 Notes on hazards during transport
38
4.2.1
Unpacking
Proceed as follows when unpacking the Positioning clamping pin
–
Remove the packaging. Dispose of packaging materials such as foils and adhesive
tapes properly.
–
Do not throw away the original packaging. Keep it for re-transport.
–
Check the delivery for completeness by comparing it to your order.
–
It is essential that you keep the supplied documents; they contain important
information on how to use the Positioning clamping pin.
–
Check the package contents for visible transport damage.
–
If you notice any transport damage or discrepancies between the contents of the
package and your order, please inform Erwin Halder KG.
4.2.2
Re-packaging
See chapter 4.2.1 Unpacking.
4.3
Notes on hazards during transport
WARNING
The following special hazards must be expected when transporting
the Positioning clamping pin (package units or pallets):
Hanging loads can fall down, causing a danger to life!
A danger of tipping over exists during unsecured transport!
Protruding edges can lead to bruising or cuts!
–
Only use approved load carrying devices.
–
During use or at work always wear the personal protective equipment
necessary for the work in question (protective clothing, protective gloves,
safety helmet and safety shoes).
–
Make sure that you and other persons are not under suspended loads.
–
Please also read the chapter "2 Safety".
–
The Positioning clamping pin or components may only be transported by appropriately
qualified and instructed personnel (forklift / crane driver with qualification certificate)
and in compliance with all safety instructions..
–
When selecting suitable lifting devices and lifting accessories, always consider the
weight of the heaviest component.
–
Wear protective clothing, safety shoes, protective gloves and a safety helmet when
working.
–
Always secure the transport route with an additional person.
