2 Safety
2.3 General safety instructions
17
2.3
General safety instructions
–
The Positioning clamping pin may be put into operation and serviced only after these
Original operating instructions have been taken notice of.
–
Only use the Positioning clamping pin
for their intended purpose (see “2.1 Intended
–
Do not loosen the Positioning clamping pin if there are other people in the danger
zone.
–
When operating the Positioning clamping pin, refrain from any kind of work that could
impair the safety of persons or the Positioning clamping pin.
–
Never operate the Positioning clamping pin with defective components. Never put
built-in safety features out of operation.
–
Always keep the work area of the Positioning clamping pin clean and tidy to avoid
danger from dirt and parts lying around.
–
Do not exceed the technical performance data (see "3.3 Technical data").
–
Keep all safety and danger warnings on the Positioning clamping pin in a legible
condition and renew them as necessary.
–
Operation and work on the Positioning clamping pin may only be carried out by
qualified or instructed personnel (see “2.2 Staff requirements“).
–
In case of malfunctions, stop using the Positioning clamping pin immediately. Have
faults rectified by appropriately trained specialists or by Erwin Halder KG .
–
Always keep the Original operating instructions at the place the Positioning clamping
pin is used. It must be ensured that all persons who carry out activities on the
Positioning clamping pin can read the Original operating instructions at any time.
2.4
Safety measures for environmental protection
During all work, comply with the regulations on waste avoidance and proper waste
recycling or disposal.
Particularly during assembly and maintenance work as well as during decommissioning,
care must be taken to ensure that groundwater-polluting substances such as Cleaning
liquids (containing solvents) and other chemical substances or emissions do not pollute
the ground or enter the sewer system. These substances must be collected in suitable
containers, and stored, transported and disposed of in accordance with national
regulations.
