5 Assembly
5.3 Choice of location of use
41
5.3.2
Requirements for the location of use
WARNING
Risk of injury due to instability!
If incorrectly assembled, a risk of serious injury exists due to instability of
the individual component groups when using the Positioning clamping pin!
–
Note that the location of use must be:
–
flat, horizontal,
–
temperature resistant, non-flammable and
–
vibration-free
.
–
Have the installation work carried out only by authorised and instructed
personnel.
–
During assembly, observe the tightening torques of all screw
connections.
–
During use or at work always wear the protective equipment required for
the work in question (such as protective clothing and safety shoes).
WARNING
Risk of injury due to lack of space!
A risk of serious injuries such as scratches, piercing or broken bones exists
from work equipment and/or components being arranged too closely
together!
–
The location of use of the Positioning clamping pin must be selected in
such a way that the room to manoeuvre necessary for personnel in the
work area is not restricted or impeded.
–
Maintain the room to manoeuvre according to ergonomic guidelines and
standards.
–
Cordon off the danger area.
–
Keep unauthorised persons away.
–
Designate a person to be in charge.
When selecting the set-up location, take into account the necessary operating
and maintenance areas.
The clearance at the Positioning clamping pin should not be less than the
required room to manoeuvre all around.
