74
02-147015-00-00.fm
Use
Securing the front tools
1. Bring the locking hook into the front position and the lever into the lower
position
(I)
.
2. The movement limiter of the front tool carrier is determined by the
chain
Fig. 65-C
and the hooking point of the chain.
•
For vacuum sweeping, hook the chain in the holder
Fig. 65-D
with the
first link.
•
For attachments with floating position the chain must be hooked onto
the hook
!
3. Check the locking plate
on the attachment. If necessary,
loosen the screws and shift the locking plate.
The following is shown in the multifunction display: Driver not on driver's
; upper end position of the front tool carrier
Fig. 64-X2
;
floating position of the front tool carrier
; front tool carrier low-
ered and fixed
Fig. 64-X4
.
Fig. 64:
X2
X4
X3
X1
Fig. 65:
A
B
II
I
B
C
E
C
D
F
Summary of Contents for 147015
