HAKO 147015, Operating Manual

Page: 180 / 190

180
06-147015-00-00.fm
Attachments and Options
Check-list – Snow clearing
Driving to the work site
1. Bring the snow blade into the transport position, see page 157.
2. Start the vehicle with the ignition switch
Fig. 196-76 .
3. As required, switch on the dipped headlights Fig. 196-55 , working light
Fig. 196-56 and rotating beacon Fig. 196-60 .
4. Drive to the work site in the transport mode. The front attachment must
be in the upper end position for the transport mode. Push the joystick
Fig. 197-70 back for this purpose.
Switching snow clearing on
1. With the joystick Fig. 197-70 lower the snow blade into the floating
position.
2. Start snow clearing in the transport mode.
Switching spreading on
1. Switch the hydraulic oil circuit II for rear attachments on with the turn-
push knob Fig. 197-69 .
2. Start spreading in the transport mode.
No. Description Reference
1 Driving to the work site Page 180
2 Switching snow clearing on Page 180
3 Setting the fixed engine speed Page 181
4 Starting snow clearing Page 181
Fig. 196:
1
2
P
0
76
56
55
60
Note
For snow clearing with the front sweeping machine, the pro-
cedure is similar to that described on page 163.
71
Fig. 197:
70
69
Note
Switch the spreader off with a time delay:
The spreading run-on time can be set between 0 and
4 seconds in the C menu in menu item E (winter operation).
Spreader fast emptying:
Spreader fast emptying can be switched on and off in the C
menu in menu item E (winter operation).