HAKO 147015, Operating Manual

Page: 135 / 190

06-147015-00-00.fm
135
Attachments and Options
Checklist – Vacuum sweeping
Driving to the work site
1. Lock the sweeping unit with the transport protection device Fig. 128-A ,
see page 134.
2. Start the vehicle with the ignition switch Fig. 129-76 .
3. As required, switch on the dipped headlights Fig. 129-55 , working light
Fig. 129-56 and rotating beacon Fig. 129-60 .
4. Drive to the work site in the transport mode. The sweeping unit must be
in the upper end position for the transport mode. Push the joystick
Fig. 130-70 back for this purpose.
5. Unlock the transport protection device at the work site, see page 134.
Switching vacuum sweeping on
Switch on the work mode with the Hako button Fig. 130-71 . The accelera-
tor pedals must be in the neutral position.
The vacuum sweeping system work mode information symbol
Fig. 130-A
is displayed in the multifunction display as a 2-brush system.
The following functions are activated automatically by pressing the Hako
button:
•
The sweeping unit is lowered (floating position)
•
The rotating brush drives are switched on
•
The rotating brush speed is activated
•
The fresh water pump is switched on
•
The circulating water supply is switched on
•
The suction fan is switched on
The fresh water supply is interrupted if the driver leaves the driver's seat!
No. Description Reference
1 Driving to the work site Page 135
2 Switching vacuum sweeping on Page 135
3 Setting the fixed engine speed Page 136
4 Starting vacuum sweeping Page 136
5 Sweeping dry surfaces Page 136
6 Sweeping wet surfaces Page 136
7 Sweeping larger objects Page 137
8 Changing the sweeping width Page 137
9 Checking the overload protection Page 137
Fig. 129:
1
2
P
0
76
56
55
60
71
Fig. 130:
A
70