background image

168

06-147015-00-00.fm 

Attachments and Options

Setting the fixed engine speed

The fixed engine speed is set with the switch 

Fig. 180-64

. Set the speed 

according to the requirements.
The speed must be set so that a centrifuging effect is achieved.

Starting sweeping

The accelerator peda

Fig. 181-36

 is used for continuously changing the 

speed for driving forwards. 
The accelerator peda

Fig. 181-37

 is used for continuously changing the 

speed for reversing.
Push the accelerator pedal down slowly until the vehicle starts, the speed 

is increased further by pressing on the pedal. 
Slowing down or braking the vehicle: Slowly reduce the pressure on the 

accelerator pedal, the vehicle slows down or stops.
The vehicle speed in the:

transport mode is 0 to 25 km/h,

work mode 15/20/25 km/h according to selected engine speed.

Setting down the front sweeping machine

Set the front sweeping machine so that the bristles of the sweeping roller 

do not touch the ground.
1. Loosen the suppor

Fig. 182-A

 from the rear holder 

Fig. 182-B

 of the 

front sweeping machine by removing the bolt and split-pin.

2. Insert the support in the front holder 

Fig. 182-C

.

3. Secure with bolt and split pin when the required supporting height is 

reached.

Fig. 180:

64

Stage

rpm

Use

1 – ECO

1900

At low load

2 – Standard 2250

For medium load

3 – Maximum 2630

For high load

Fig. 181:

36

37

Fig. 182:

A

C

B

Summary of Contents for 147015































































































































































































Reviews: