186
06-147015-00-00.fm
Attachments and Options
6.5.4
Operation
Coupling the trailer
1. Apply the parking brake of the trailer.
2. Set the trailer drawbar to the height of the coupling on the towing
vehicle.
3. Attach the trailer to the jaw coupling or the ball head coupling.
4. Check the locking of the coupling.
5. Release the height setting of the drawbar or remove the support.
6. Hitch the arrester cable on trailers with overrun brakes.
7. Establish connections and check functioning.
8. Remove the wheel chocks and release the parking brake of the trailer.
9. Check the brakes after moving the vehicle.
Uncoupling the trailer
1. Stop the vehicle and apply the parking brake of the towing vehicle.
2. Apply the parking brake of the trailer.
3. Undo connections.
4. Secure towing drawbar to prevent it from falling down.
5. Open coupling and slowly drive towing vehicle away.
Starting transport
The accelerator pedal
is used for continuously changing the
speed for driving forwards.
The accelerator pedal
is used for continuously changing the
speed for reversing.
Push the accelerator pedal down slowly until the vehicle starts, the speed
is increased further by pressing on the pedal.
Slowing down or braking the vehicle: Slowly reduce the pressure on the
accelerator pedal, the vehicle slows down or stops.
The vehicle speed in the:
•
transport mode is 0 to 25 km/h,
•
work mode 15/20/25 km/h according to selected engine speed.
Warning
•
Only put the attachment into service if all instructions stipulated in the operating manual of the
attachment manufacturer have been observed.
•
There is a risk of being crushed at the drawbar. Make sure your hands do not reach into the
crushing zone.
•
Before driving with the vehicle, fully raise and secure the support wheel. The support wheel may
be torn off and fly off when driving!
•
Drive with extreme caution when towing a trailer, since the braking distance is longer than usual!
Caution
•
Pay attention to the maximum support load of the trailer coupling.
•
Also secure trailer with wheel chocks when parking the vehicle on a slope!
•
Also load the loading surface of the towing vehicle in order to increase traction, reduce the slip
between the tyres and the road surface and also reduce tyre wear, and increase general driving
safety.
Fig. 204:
X65
Fig. 205:
Summary of Contents for 147015
