06-147015-00-00.fm
181
Attachments and Options
Setting the fixed engine speed
The fixed engine speed is set with the switch
. Set the speed
according to the requirements.
Starting snow clearing
The accelerator pedal
is used for continuously changing the
speed for driving forwards.
The accelerator pedal
is used for continuously changing the
speed for reversing.
Push the accelerator pedal down slowly until the vehicle starts, the speed
is increased further by pressing on the pedal.
Slowing down or braking the vehicle: Slowly reduce the pressure on the
accelerator pedal, the vehicle slows down or stops.
The vehicle speed in the:
•
transport mode is 0 to 25 km/h,
•
work mode 15/20/25 km/h according to selected engine speed.
Fig. 198:
Stage
rpm
Use
1 – ECO
1900
At low load
2 – Standard 2250
For medium load
3 – Maximum 2630
For high load
Fig. 199:
Attention
Before you leave the vehicle, the attachment must be lowered
to the ground!
Summary of Contents for 147015
