HAKO 147015, Operating Manual

Page: 149 / 190

06-147015-00-00.fm
149
Attachments and Options
Maintenance work
Inserting the safety strut
Raise the emptied dirt hopper with the button Fig. 156-74 up into its end
position.
Hinge over the safety strut
Fig. 156-B .
Lower the dirt hopper with the button Fig. 156-74 and insert the safety
strut in the recess Fig. 156-A .
Checking the rotating brushes
Check the rotating brushes Fig. 157-A daily. Adjust the rotating brush
pressure as required, see page 150. If the rotating brush pressure is
changed, the sweeping level must be reset, see page 150.
Change worn out rotating brushes.
To do this, raise the sweeping unit with the joystick
Fig. 160-70 . Remove
the caps Fig. 157-B and loosen the nuts located below. Turn the rotating
brush counter-clockwise and push it downwards.
Warning
•
Always bring and insert the safety strut Fig. 156-A of the dirt hopper into the upper position during
maintenance and cleaning work under the raised dirt hopper. There is a risk of injury!
•
Staying in the danger area is forbidden when raising and lowering the dirt hopper!
Fig. 156:
A
B
74
Fig. 157:
B
A