HAKO 147015, Operating Manual

Page: 179 / 190

06-147015-00-00.fm
179
Attachments and Options
6.4.4 Operation
Checklist – Before start-up of the snow clearing system
Switching winter operation on
Select the C menu in the multifunction display with the turn-push knob
Fig. 194-69 and activate winter operation in the menu item E, see
page 42. The Winter service information symbol Fig. 194-A appears in the
multifunction display.
Adjusting the attack angle
Adjust the attack angle with the joystick Fig. 194-70 .
•
Joystick to the left: The front attachment swivels to the left
•
Joystick to the right: The front attachment swivels to the right
Loading the loading platform
Note when loading the loading platform:
•
Load on the loading platform (bulk goods) with spreader attached
maximum 150 kg
•
Load on the loading platform (bulk goods) with spreader not attached
maximum 400 kg
•
Load on the loading platform (piece goods) with spreader attached:
maximum 100 kg
Filling height of the loading platform, see mark Fig. 195-A . Load capacity
of the tie-down eyes Fig. 195-B : maximum 100 daN. You can use the
separating board Fig. 195-C for different materials.
Loading the spreader
Different specific weights arise according to the condition of the spread
material (wet or dry). Check the specific weight of the spread material
before filling.
Payload of the spreader, see operating manual of the spreader.
Adjusting the spread volume
Adjusting the spread volume, see operating manual of the spreader.
Adjusting the spreading width
The spreading width depends on the condition of the spread material and
the speed of the spreading disk. The more coarse grained the spread
material is, the larger is the possible spreading width.
Adjusting the spreading width, see operating manual of the spreader.
No. Description Reference
1 Checking the suction mouth lift system Page 134
2 Checking the front tool carrier Page 134
3 Switching winter operation on Page 179
4 Adjusting the attack angle Page 179
5 Loading the loading platform and spreader Page 179
6 Adjusting the spreading volume Page 179
7 Adjusting the spreading width Page 179
Fig. 194:
70
69
A
Warning
Use winter operation only in connection with an uncoded
attachment. In winter operation the front lift system is not lim-
ited downwards. There is a risk of an accident on unintended
lowering of the attachment.
Fig. 195:
C
B
A