9 / 41
Hakki Pilke 35 Falcon
Translation
Version 10
2.3.
Arranging the machine for operation and transport
Before arranging the machine for operation and using it, ensure that the operating conditions, detailed in Section
1.4, are met and review the safety instructions in Section 1.5.
Note! Inspect and clean the machine before setting it up for transport!
Placing the in-feed conveyor in the operating or transportation position
Place the in-feed conveyor in the oper-
ating position as follows:
Ensure that sufficient room is available
to lower the in-feed conveyor (approx.
2 m).
Remove the other end of support leg
holder C from the lug (Figure 2).
Figure 2
Release the lock (Figure 3) by removing
pin A and turning (Figure 2) locking
latch B out of its slot.
Note! At the same time, hold the end of
the in-feed conveyor with your left
hand!
Lower the in-feed conveyor with your
left hand while simultaneously using
your right hand to guide support leg D
Figure 3
