34 / 41
Hakki Pilke 35 Falcon
Translation
Version 10
4.12. Saw chain lubrication
The saw chain is automatically lubricated whenever
the saw bar is pressed down. The oil is dispensed
from canister B onto the saw chain by means of
pressure applied with an oil pump.A single pump
stroke is carried out every time the saw bar is
pressed downwards.
The amount of saw chain oil can be adjusted with
adjustment screw F (Figure 41). When the screw is
tightened, less oil is fed to the saw chain, and vice
versa. If the pump needs to be bled, detach adjust-
ment screw F entirely from the pump and press the
pump piston repeatedly with a hex key, for example.
Inspection opening E can be used to monitor the oil
level. Oil should be added when there is approx. 5
cm of oil left in the canister (Figure 420). Detach the
protective cover of the canister by removing locking
screw D and lifting the protective cover using open-
ing C.
Figure 40
Figure 41
Figure 42
