10 / 41
Hakki Pilke 35 Falcon
Translation
Version 10
into slot E (Figure 4).
When placing the in-feed conveyor in
the transport position, lift the conveyor
to the upper position, turn locking latch
B (Figure 3) into its slot and insert pin A
(Figure 2). Use holder C to lock the sup-
port leg in place (Figure 2).
Figure 4
Placing the out-feed conveyor in the operating or transport position
Place the out-feed conveyor in the operating position as follows:
1.
Ensure that there is sufficient
room for opening the out-feed
conveyor.
2.
Turn off the machine and discon-
nect it from the power source.
3.
Keep lock A (Figure 4a) open and
lower the out-feed conveyor using
a winch to its lowest position.
Figure 4a.
Figure 4b.
