11 / 41
Hakki Pilke 35 Falcon
Translation
Version 10
4.
Turn the upper section of the con-
veyor into the operating position
using handle B (Figure 4b).
5.
Turn transport position support
bar C on the out-feed conveyor
belt (Figure 4c) to the side.
6.
Use a winch to lift the conveyor to
the desired angle (max 40°) and
lock the upper section of the out-
feed conveyor to the operating
position using lock D (Figure 4d).
Figure 4c.
Figure 4d.
Place the out-feed conveyor in the transport position as follows:
1.
Turn off the machine.
2.
Release lock D (Figure 8) and lower the conveyor to the lowest possible position with the winch.
3.
Turn support bar C (Figure 7) to a position over the belt, and turn the upper section of the conveyor on-
to the lower section using handle B (Figure 6).
4.
Turn the conveyor to the middle position (only in machines with a pivoting conveyor). See Section 3.6.
5.
Lift the conveyor with the winch until it locks into the raised position. Ensure that lock A (Figure 5) set-
tles properly into place.
Note! Do not stand on the out-feed conveyor! Do not use the winch if the belt is worn!
