20 / 41
Hakki Pilke 35 Falcon
Translation
Version 10
Re-splitting or splitting without cutting
1.
Raise the protective cover of the cutting and splitting channel.
2.
Place the log you want to split in the splitting groove.
3.
Close the cutting/splitting guard.
4.
Activate the splitting using lever A (Figure 11).
The above procedure can be used to split wood without cutting it, as necessary.
3.6.
Using the out-feed conveyor
The belt of the Hakki Pilke Falcon firewood processor’s out-feed conveyor is driven by a hydraulic motor. To
change the speed of the belt, use adjuster F (Figure 11). The optimal speed for the cleaning out-feed conveyor
belt can be determined by trying different settings. The split logs should only just pass over the plate. The separa-
tion plate can be adjusted with adjustment screws B in Figure 25.
The out-feed conveyor can be adjusted laterally and vertically. The following describes how the conveyor can be
turned laterally by using turning lever A and handle B (Figure 12):
Figure 12
Release the lock of the conveyor by pushing lever A towards the conveyor, and turn the conveyor to the desired
position with handle B (Figure 12).
The maximum operating angle for the out-feed conveyor is 40°. The maximum angle is indicated on the label
(Figure 13) and the instructions attached to the out-feed conveyor.
