27 / 41
Hakki Pilke 35 Falcon
Translation
Version 10
Replacing the saw bar
Replace the saw bar as follows (Figure
22
Virhe. Viitteen lähdettä ei löytynyt.
):
1.
Remove the saw chain according
to steps 1–5 of Section 4.7 “Re-
placing and tightening the saw
chain”.
2.
Remove flange bolts (2 pcs) and
remove the flange fastening plate
A.
3.
Remove the saw bar from the
groove.
4.
Place the new flange against gear
wheel B, twist it into the groove
and loosely attach the flange
bolts and fastening plate A.
5.
Attach and tighten the saw chain
according to steps 6–8 of Section
4.7 “Replacing and tightening the
saw chain”.
Figure 22
