21 / 41
Hakki Pilke 35 Falcon
Translation
Version 10
Figure 13
If the conveyor is jammed for any reason, its running speed must be set to zero and the machine must be shut
down before removing the cause. There must be at least 50 cm between the end of the out-feed conveyor and
the pile of processed firewood.
Note! The operator must ensure that the distance between the debris discharge opening and the pile of debris
that accumulates under it is at least 20 cm.
3.7.
After use
1.
After you have finished making firewood, stop the out-feed conveyor, shut down the machine and re-
move the firewood from the splitting channel and conveyor.
2.
Check that the machine has not been damaged.
3.
Place the out-feed conveyor into a position that allows the conveyor and firewood processor to be moved
safely off the processed firewood.
4.
Clean the machine.
If you will not be using the firewood processor for a while, do the following:
5.
As necessary, use your tractor's hydraulics or a forklift to hoist the firewood processor and carefully move
it to a location where you can place the in-feed and out-feed conveyors as well as the working platform
into their transport and storage positions.
6.
Place the conveyors into the transport and storage position.
7.
Clean the machine and carry out any maintenance.
8.
Store the machine according to the instructions in Section 4.15.
