37 / 41
Hakki Pilke 35 Falcon
Translation
Version 10
4.14. Washing and cleaning
Any loose dirt and sawdust can be removed from the machine with pressurised air, for example. The machine can
also be washed with a high-pressure washer as long as the water jet is not aimed directly at the bearings or elec-
trical equipment.
Always ensure that the machine and the working area are sufficiently clean during operation. The machine must
always be cleaned after use. Clean the machine at suitable intervals and always before storing the machine for a
prolonged time. After washing, the machine must be lubricated according to the instructions in Section 4.11.
4.15. Storage
The firewood processor must be stored on a level and solid foundation. Although the machine is intended for
outdoor use, it should be covered and stored in a sheltered location or indoors. Before prolonged storage, the
machine must first be cleaned, then washed according to Section 4.14 and lubricated according to Section 4.11.
4.16. Maintenance table
Item
Task
Daily
Interval
Substance/accessory item
100
h
500
h
Multiplier gear oils
(TR and Combi mod-
els only)
Check
1st change
Subsequent
X
X
X
SAE 80/90 approx. 0.5 l
See section 4.9
Hydraulic oil
Normal conditions
Check
1st change
Subsequent
X
X
X
Quantity approx. 70 l, ISO VG 32,
for example. In warm conditions
and for the TR model, use ISO VG
46, for example
Oil filter
Always when
changing oil
HEK02-20.201-AS-RP025-VM-B17-B
Spare part no:
97348
All levers
Lubrication
X
Lubrication oil
Saw chain
Sharpen/
replace as neces-
sary
0.325” 67vl 1.5 mm
Recommendation: Oregon
Spare part:
95416
Saw bar
Maintain/
replace
as necessary
16” 1.5 mm
Recommendation: Oregon
Spare part:
95147
Machine
Clean
Wash
X
Electric motor
Cleaning
X
Electrical equipment
Cleaning
X
Winch and strap
Check
X
