SECTION 3 –
CAB
3-50
The Override Engine Shutdown Button
(located on the Machine Diagnostics Page)
allows the operator to continue running the
engine for a calibrated time period in order to
move the vehicle to a safe stopping location.
To Temporarily Avoid Engine
Shutdown (Derate)
•
Press and hold the Override Engine Shut-
down Button (located on the Machine
Diagnostics Page) momentarily.
Refer to the engine manufacturer’s
operation manual for further information.
CAN Monitor
(Controller Area Network)
The CAN Monitor on your machine is an
analysis/communication tool used in
combination with machine software, which
allows you to view real-time data of machine
systems. The CAN Monitor screen allows
you to view CAN messages on each of the
CAN networks.
CAN1/CAN2/CAN3
• CAN1 = Engine
• CAN2 = Primary/Secondary Controllers
• CAN3 = Diagnostics (Primary Controller)
NOTE: CAN3 by itself does not go to display
and is CAN for third party systems.
Rx (Display Message “Received”)
Tx (Display Message “Transmitted”)
To View CAN Status
•
Press the Monitor Button (located on the
Settings Page).
•
Press desired Enable CAN Button
(Enable CAN1, Enable CAN2, or Enable
CAN3) (located on the CAN Monitor
screen) to view current CAN status.
NOTE: Press the Suppress Rx Button to
remove “received” data before the
Enable CAN Button is selected.
Press the Suppress Tx Button to
remove “transmitted” data before the
Enable Can Button is selected.
Override Engine Shutdown Button
(Located on the
Machine Diagnostics Page)
Monitor Button
(Located on the Settings Page)
Enable CAN Buttons
(Located on the CAN Monitor Screen)
Summary of Contents for STS12i Combo
Page 276: ......
