Hagie STS12i Combo, Manual, Page: 243 / 276

9-8
SECTION 9 –
MISCELLANEOUS
• Rotate the bottom Solution Connection Valve in
the fully COUNTER-CLOCKWISE (Open)
position.
• Rotate the top Solution Connection Valve in the
fully COUNTER-CLOCKWISE (Open) position.
Foam Marker Connection
-If Equipped
NORAC Connection
-If Equipped
Hydraulic and Electrical Connections
Solution Connection Valves
and Cam Lock Levers
(Located on the front
right-hand side of machine)
-Typical View
* View shown from behind front right-hand wheel
• Solution
Connection
Valves
• Solution Connection
Cam Lock Levers
Foam Marker Connection
(Located on the front
right-hand side of machine)
-Typical View
NORAC Connection -
if equipped
(Located on the front
right-hand side of machine)
-Typical View
Hydraulic/Electrical Connections
“Standard”
(Located on the front
left-hand side of machine)
-Typical View
• Electrical - Connect machine and boom
electrical connectors together. Ensure snap
ring is secured.
• Hydraulic - Remove caps from machine and
boom hydraulic connections. Connect
hydraulic hoses together and tighten.
• Hydraulic
Connections
• Electrical
Connection