3-33
SECTION 3 –
CAB
Button (located on the Settings Page)
to the OFF (red illuminated
“disabled”) position. However, the
Warning Light Indicator will remain
illuminated until the issue has been
corrected.
Warning Buzzer
The Warning Buzzer alerts the operator
when a system fault is detected and requires
immediate attention. To silence the buzzer,
press the Sound Button (located on the
Settings Page) to the OFF (red illuminated
“disabled”) position.
NOTE: The Sound Button will reset to the
ON (enabled) position each time the
ignition key is cycled.
Lighting Adjustment
(Day Time/Night Time)
To Adjust the Display, Keypad, and
Console Lighting
•
Press the Brightness Button (located on
the Settings Page).
•
On the “Brightness” screen, press desired
“Day Time” or “Night Time” Button.
•
Adjust corresponding day time and/or
night time Display, Keypad, Console, or
All brightness levels UP or DOWN to
desired setting.
•
Press BACK when finished.
To Set Automatic Night Time Transition
Brightness
NOTE: Night Time brightness levels must be
manually set (as previously
described) before setting automatic
transition brightness.
Warning Light Indicator
(Located on the top left-hand
side of each display page)
Sound Button
(Located on the Settings Page)
Brightness Button
(Located on the Settings Page)
Brightness Screen
Summary of Contents for STS12i Combo
Page 276: ......
