3-17
SECTION 3 –
CAB
Foam Marker Switch
- If Equipped
The Foam Marker Switch (located on the
side console) controls foam application on
both sides of the machine.
Refer to “Foam Marker” provided in the
Spray Systems Section
elsewhere in this
manual for further information.
Ignition Switch
The Ignition Switch (located on the side
console) has three positions - OFF, ON, and
START. Before engaging the starter, turn the
ignition key to the ON position and wait for
the “wait to start” message to disappear on
the Machine Display.
NOTE: The parking brake must be engaged
before engaging the starter.
•
To engage the starter
, turn the key to
the START position and hold momentar-
ily until the engine engages. If the engine
does not engage after 15 seconds, turn
the key to the OFF position.
NOTE: Constant cranking of the starter will
cause damage to the battery and
starting system.
Power Mirrors
-If Equipped
Your machine may be equipped with
Power Mirrors for your operating
convenience.
•
Press the L/R Lever in the “L” position
to adjust the LEFT mirror or in the “R”
position to adjust the RIGHT mirror.
•
Press the Adjust Switch to adjust the cor-
responding mirror to desired position.
Foam Marker Switch
(Located on the side console)
-Typical View
Ignition Switch
(Located on the side console)
-Typical View
Summary of Contents for STS12i Combo
Page 276: ......
