SECTION 4 –
ENGINE AND DRIVE SYSTEMS
4-13
To Disengage the Parking Brake
NOTE: If the Hydrostatic Drive Control
Handle is out of neutral while the
parking brake is engaged, the
following warning message will
appear on the Machine Display.
Press OK to acknowledge.
Hydrostatic Drive Control Handle -
Version 1
•
To disengage the Parking Brake and
raise the Ladder
, press and hold the
Decel Pedal (located to the lower right-
hand side of the steering column) and
move the Hydrostatic Drive Control
Handle to the LEFT (Neutral position).
Hydrostatic Drive Control Handle -
Version 2
•
To disengage the Parking Brake and
raise the Ladder
, press and hold the
Decel Pedal (located to the lower right-
hand side of the steering column) and
press the Parking Brake Switch in the
DOWN (Off) position.
Deceleration (Decel) Pedal
When nearing an end row and speed
deceleration is desired, press the Decel Pedal
(located on the lower right-hand side of the
steering column) to decrease speed.
NOTE: The Decel Pedal is NOT a brake! It
is designated for speed reduction
only.
Setting Decel Pedal Minimum Speed
Refer to “Machine Display” provided in
the
Cab Section
elsewhere in this manual for
further information.
Target Speed
The Target Speed (displayed on the
Machine Display Home Page - Road and
Field Mode) is the speed in which the
NOTICE
The Decel Pedal must be held in the
DOWN position while disengaging the
parking brake.
Parking Brake Indicator
(Located on the top left-hand
side of each Machine Display page)
Parking Brake Warning Message
Decel Pedal
(Located on the lower right-hand
side of the steering column)
-Typical View
Summary of Contents for STS12i Combo
Page 276: ......