SECTION 3 –
CAB
3-14
Rear Nozzle Switch
The Rear Nozzle Switch (located on the
side console) controls the two (2) rear nozzles
(located behind the rear tires).
Refer to the
Spray Systems Section
elsewhere in this manual for further
information.
Rate Control Switches
The Rate Control Switches (located on the
side console) control the rate in which
solution is applied through the spray booms
by either the rate controller (Enable) or
operator-controlled spray rate (Manual).
NOTE: When both “MAN” and “ENABLE”
Rate Control Switches are pressed,
manual rate control is activated
through the rate controller.
Refer to the
Spray Systems Section
elsewhere in this manual for further
information.
Pump Speed/Rate Switches
The Pump Speed/Rate Switches (located
on the side console) allow you to increase or
decrease flow rate through the spray system.
NOTE: When the “MAN” Rate Control
Switch is pressed, the Pump Speed/
Rate Switches increase or decrease
pump speed/application rate from the
Hagie control system. When the
“ENABLE” Rate Control Switch is
pressed (with either “MAN” active
or inactive), a third party rate
controller increases or decreases
pump speed/application rate.
Refer to the
Spray Systems Section
elsewhere in this manual for further
information.
Main Tank Valve Switch
The Main Tank Valve Switch (located on
the side console) controls the solution tank
valve. This switch must be in the ON (Open)
position for spray application.
Rear Nozzle Switch
(Located on the side console)
-Typical View
Rate Control Switches
(Located on the side console)
-Typical View
Pump Speed/Rate Switches
(Located on the side console)
-Typical View
Summary of Contents for STS12i Combo
Page 276: ......