13
Fit front fence
Sit aluminum riser block on outrigger as shown
Sit fence on its side as shown and align the 2 x locating pins front
and back and the middle lock down bolt as shown.
Tilt fence over the right way
locating the 3 in perspective
holes.
Screw in 1 ratchet handle to front pivot pin.
Holding alloy riser block up onto fence, swing fence to the rear of machine and fit large washer and
locking Knob onto middle stud. Swing fence back and fit other ratchet handle to outer locating pin.
Ensuring fence is pulled back against stop,
( slid away from blade and swung to be on 90 degrees)
lock it in place.
Fit one of the sliding stops to the extension block. Push all the way to the pin in the block and lock in
place.
Fence extension
block
Sliding stops
