15
Fit Right hand table extension guard as shown
Fit work
clamp
Slide onto
end of table
and lock in
place when
needed.
Fit blades
Extreme care must be taken due to sharp blade teeth.
Ensuring machine is not connected to power
Slide table assembly all the way back to gain access to blade area
Pull lower blade guard assemble open
NB blade nuts undo the direction the blade spins in use. Main blade Clockwise Scribe blade Anti-
Clockwise) (see pic)
Fitting scribe blade ( turns anti-clockwise in use)
With large double ended spanner and 10mm allen key supplied fit key in spindle hole and undo nut
anti-clockwise. Remove nut and support flange completely
Fit scribe blade then flange and nut, do up nut tightly using opposite forces against allen key
Fit main blade
( turns clockwise in use )
With large double ended spanner
and 10mm allen key supplied fit
key in spindle hole and undo nut
clockwise. Remove nut and
support flange completely
Fit main blade then flange
ensuring both are sitting correctly
on the 2 x locating pins then screw
on nut do up nut tightly using
opposite forces against allen key.
