12
Fit sliding table outrigger frame
Swing out outrigger pivot arm.
Remove rubber stopper of the
end of outrigger extension arm
and carefully insert arm with
location bolt sticking up, into
outrigger assembly. When all the
way through refit rubber stopper
tightly.
Carefully unwrap the outrigger
table being sure to find an alloy
block and 2 x ratchet handles. Put
aside for later
Ensuring main sliding table is in a locked position, fit the sliding
carriage onto the location bolt of the outrigger extension arm at the
same time sliding the table hooks
in from the front end of the
sliding table.
Slide assemble to the middle of
the sliding table and lock in
position.
Using a straight edge across the
sliding table over to the roller on
the outrigger table check and
adjust height as needed by
undoing the lock nuts on the
location pin and moving up or
down as needed. Ensure nuts are
all locked when done.
Out
rigger
pivot arm
Outrigger extension arm
Adjust and relock nuts,
top and bottom as needed