background image

 

 
 

 

BloodTrack Kiosk® V5 Installation Guide 

 

HAE: SM-BloodTrack-08(AA) 

 

SBC100xxx 

GBE:  2000-JNB0012 

 

 

Trademarks and Patents 

 

242, 271 and Loctite are trademarks or registered trademarks of Henkel AG & Co. KGaA 
in the United States and/or other countries. 

3M and VHB are trademarks or registered trademarks of 3M in the United States and/or 
other countries. 

AHP, Accelerated Hydrogen Peroxide and Virox are registered trademarks or trademarks 
of Virox Technologies Inc. in the United States and/or other countries. 

Allen is a trademark or registered trademark of Apex Tool Group, LLC in the United States 
and/or other countries. 

Amberclens and Ambersil are registered trademarks or trademarks of CRC Industries UK 
Limited in the U.K., and/or other countries. 

EcoWire is a trademark of Alpha Wire in the United States and/or other countries. 

Goldscrew, Prodrive, Quicksilver, Screwfix and TurboGold are registered trademarks or 
trademarks of Kingfisher PLC in the United States and/or other countries. 

Haemonetics, Haemonetics

 

The Blood Management Company, BloodTrack, BloodTrack 

Courier, HaemoBank and BloodTrack Manager are trademarks or registered trademarks 
of Haemonetics Corporation in the United States and/or other countries. 

Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation 
in the United States and/or other countries. 

Phoenix Contact is a trademark or registered trademark of Phoenix Contact GmbH & Co. 
KG in the United States and/or other countries. 

Pozidriv is a trademark or registered trademark of Phillips Screw Company in the United 
States and/or other countries. 

RS is a trademark or registered trademark of RS Components Ltd. in the United States 
and/or other countries. 

Schurter is a trademark or registered trademark of Shurter Electronic Components in the 
United States and/or other countries. 

Stanley is a trademark or registered trademark of Stanley Black & Decker, Inc. in the 
United States and/or other countries. 

Würth Elektronik is a trademark or registered trademark of Würth Elektronik GmbH & Co. 
KG, Germany in the United States and/or other countries. 

Xtra-Guard is a trademark of Belden Technologies, Inc. in the in the United States and/or 
other countries. 

US Patent Numbers: 6,983,884, 7,490,766, 7,490,767 and 8,261,981. 

Reader Comments 

Any comments or suggestions regarding this publication are welcomed and should be 
forwarded to the attention of: 

Haemonetics Software Solutions 
4925 Robert J. Mathews Parkway, Suite 100 
El Dorado Hills, CA  USA  95762 

[email protected]

 

Rx Only 

 

Caution:  USA Federal law restricts the sale, distribution, or use of this device to, by, or on 
the order of a licensed healthcare practitioner. 

Haemonetics Worldwide 

 

Please direct any written inquiries to the appropriate address. For a list of worldwide office 
locations and contact information, visit 

www.haemonetics.com

. 

 

 

 

Summary of Contents for BloodTrack Kiosk V5


















































































Reviews: