BloodTrack Kiosk® V5 Installation Guide
HAE: SM-BloodTrack-08(AA)
SBC100xxx
GBE: 2000-JNB0012
17
•
The electrical power socket outlet used with the power cord for the
BloodTrack Kiosk V5 shall be near to the BloodTrack Kiosk V5 and easily
accessible to allow it to be disconnected in order to remove mains power.
•
The BloodTrack Kiosk V5 shall not be installed with a permanent electrical
supply feed that cannot be disconnected.
•
In order to remove all power from this unit remove the IEC C13 cordset from
the IEC C14 inlet on the BloodTrack Kiosk V5. Note that this is a latching
type connector to avoid accidental disconnection.
•
When replacing the fuse for the mains supply, use only the fuse referenced
in
Section 2.5
. The BloodTrack Kiosk V5 utilizes
double pole live/neutral fusing. Only replace the fuse with the mains cordset
removed from the BloodTrack Kiosk V5 mains inlet.
•
Never spray water or any liquid substance directly on any part of the exterior
of the BloodTrack Kiosk V5 as the electric insulation could become seriously
damaged and cause a malfunction.
3.1
Modifications to Equipment
WARNING
Any accessories, cables and connections used in conjunction with the
BloodTrack Kiosk V5 which are not approved for such use by Haemonetics may
increase hazards and affect safety as well as influence compatibility with EMC
requirements by increasing emissions, decreasing immunity or both. Non-
approved accessories and cables must
not
be used, and no connections to
other unspecified third-party equipment done.
Do not make mechanical or electrical modifications to any part of the equipment.
Haemonetics is not responsible for regulatory compliance of a modified
Haemonetics product.
The BloodTrack Kiosk V5 is a medical equipment system and reference shall be
made to both 2
nd
and 3
rd
edition IEC 60601-1 for requirements applicable to medical
equipment systems.
Use only Haemonetics-approved peripherals, cabling and specified connections
when installing the BloodTrack Kiosk V5.
To ensure compliance to 2
nd
edition 60601-1, connections from the BloodTrack
Kiosk V5 to both LAN and peripheral USB devices must only be to Haemonetics-
approved accessory devices. A list of devices will be made available on request.
