BloodTrack Kiosk® V5 Installation Guide
HAE: SM-BloodTrack-08(AA)
SBC100xxx
GBE: 2000-JNB0012
18
3.2
Power Input
CAUTION
A delay of 5 seconds
must
be observed between switch off and on when cycling
the power input. Cycling the power is achieved either by disconnecting the DC-
In Power Input Connector (see
Section 2.1.3
—DC-In Power Input Connector
within the
BloodTrack Kiosk V5 Computer Module Hardware Guide
) or switching
off the mains input supply to external power supply unit (PSU).
The power input to the computer module accepts a wide range of DC power input
voltages from DC 9V to 32V. The power input is protected against under voltage
(7.5V), over voltage (>= 35.5V), over current and reverse voltage protection.
