BloodTrack Kiosk® V5 Installation Guide
HAE: SM-BloodTrack-08(AA)
SBC100xxx
GBE: 2000-JNB0012
34
Figure 9
Assembling active shelf
—fixing shelf cover on to metal chassis
Note:
Any optional extras which are positioned in the active shelf are connected to the
BloodTrack Kiosk V5 via the exposed micro USB port on the bottom face. This
should be done
before
putting the cover on, although optional extras can be
added after installation by carefully removing the shelf cover as the adhesive
tabs are reusable.
5.3
Mounting the BloodTrack Kiosk V5 on a Wall
CAUTIONS
•
Installer must verify that the wall will safely support four times the combined
weight of all attached equipment and hardware (44.1 lbs.
—20 kg.).
•
Choose hardware suitable for the type of wall construction and ensure it is
capable of supporting 10.8 lbs.
—4.9 kg.
•
Make sure that mounting screws are anchored into the center of the stud.
The use of an "edge-to-edge" stud finder is highly recommended.
•
Ensure the wall mount is securely fixed to the wall and the kiosk bracket is
securely fixed to the BloodTrack Kiosk V5 before sliding the kiosk bracket in
to the wall mount.
•
The two mounting parts must be secured together with a minimum of two
M4 x 10 screws on one side
—in other words, both top and bottom holes on
an easy to access side. Both left and right sides can be used to secure the
two parts together, but both top and bottom fixings must be secured.
