BloodTrack Kiosk® V5 Installation Guide
HAE: SM-BloodTrack-08(AA)
SBC100xxx
GBE: 2000-JNB0012
53
9.0
Windows Embedded Standard 7
Setup
The BloodTrack
®
Kiosk V5 is shipped with the Microsoft
®
Windows
®
Embedded
Standard 7 (WES7) operating system installed. WES7 is a platform for the
BloodTrack Courier
®
software to be installed, and run on the BloodTrack Kiosk V5.
The BloodTrack Courier software is the only software interface the end-user
interacts with once the BloodTrack Kiosk V5 is installed on-site. The Haemonetics
®
technical team are responsible for installing the BloodTrack Courier software onto
the BloodTrack Kiosk V5 during the installation and commissioning of the device at
the healthcare location.
9.1
Setup Process
Upon powering the device, the BloodTrack Kiosk V5 will present the Windows
“Out
of Box Experience
” (OOBE) that allows the installation technician to configure the
operating system to suit the healthcare site requirements before the BloodTrack
Courier software is installed. See
Section 2.7
—Network Specification (Ethernet)
regarding the required risk analysis procedures and considerations when installing
the BloodTrack Kiosk V5 at the healthcare site.
Note:
The setup process requires a keyboard connected to the BloodTrack Kiosk V5
via one of the available USB ports
—see
Section 2.8
During the initial start-up, do not press any keys or buttons until
Step 2
of this
process,
and the “Set Up Windows” window appears.
To configure the WES7 operating system:
1. Power up the BloodTrack Kiosk V5. The following screen will display:
