manualshive.com logo in svg

Hach AutoCAT 9000, Instruction Manual

Share
Download
Hach AutoCAT 9000 Instruction Manual Download Page 54

PAO/5.64 mN

PAO/5.64 mN
Page 52

50081_PAONaThioCalibration.fm

1.

Turn the instrument on 

if necessary and access the 
Titrants menu.
Press 

4 

to select Titrant 

Library.

Note: 

Supervisor-mode is 

required to access calibrations. 
See Accessing Supervisor 
Mode on page 33.

2.

Highlight ID.

Press the 

CHECK MARK

 

to change.

3.

Highlight

PAO 5.64mN.
Press the 

CHECK MARK

 

to validate.

Note: 

PAO 5.64mN has been 

chosen for demonstration 
purposes only.

4.

Press 

1

 to select 

Edit titrant.

5.

Press the 

CHECK MARK

 

to change the titrant 
concentration input mode.

6.

Highlight Calibrate.

Press the 

CHECK MARK

 

to validate.

7.

The titrant 

concentration input mode is 
now set to Calibrate and 
calibration parameters are 
available by scrolling this 
screen. Press 

ESC

 twice to 

return to the Titrants menu.

8.

Press 

1

 to select 

Calibrate/Enter titrant conc.

Note: 

Titrant calibration is 

required before further 
analyses may be run, as 
indicated by the “Stormy” icon.

AutoCAT Calibration Method

PAO/5.64 mN Titrant

Summary of Contents for AutoCAT 9000

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands