5-25
1) Select
6
from the BootWare main menu to start the system without loading the system
configuration.
The following information appears:
Flag Set Success.
2) When the BootWare main menu appears again, select
0
to restart the system.
System starts booting …
3) Set a new password in system view.
<System>system-view
[System]user-interface aux 0
[System-ui-aux0]authentication-mode password
[System-ui-aux0]set authentication password simple 123456
This means that password authentication is required for console port login, and the password has been
set to
123456
in plain text.
z
Upon reboot, the system runs with the default configuration, with the configuration file stored in the
flash memory. To restore the original configuration, use the
display saved-configuration
command to view the contents of the configuration file, copy them and run them.
z
If the password is stored in plain text, you can use the
display current-configuration
command to
view the password in the current configuration. If you use the
set authentication password
cipher 123456
command to set your password, the password will be stored in cipher text.
4) Save the new configuration.
[System] save
After modifying the user password, use the
save
command to save it.
Super Password Loss
The super password allows you to switch between four super levels. Without a super password, you
cannot perform higher privilege operations.
Select
8
from the BootWare main menu to clear the super password.
