43
The DSCP value is carried in the Traffic class field of an IPv6 packet, and it indicates the
transmission priority of the packet.
Examples
# Set the DSCP value for IPv6 to use for outgoing Telnet packets to 30 on a Telnet server.
<Sysname> system-view
[Sysname] telnet server ipv6 dscp 30
terminal type
Use
terminal type
to specify the terminal display type.
Use
undo terminal type
to restore the default.
Syntax
terminal type
{
ansi
|
vt100
}
undo terminal type
Default
The terminal display type is ANSI.
Views
User line view, user line class view
Predefined user roles
network-admin
Parameters
ansi
:
Specifies the terminal display type ANSI.
vt100
: Specifies the terminal display type VT100.
Usage guidelines
The device supports two terminal display types: ANSI and VT100. As a best practice, set the display
type to VT100 on both the device and the configuration terminal. If either side uses the ANSI type, a
display problem such as cursor positioning error might occur when a command line has more than
80 characters.
Examples
# Set the terminal display type to VT100.
<Sysname> system-view
[Sysname] line vty 0
[Sysname-line-vty0] terminal type vt100
user-interface
Use
user-interface
to enter one or multiple user line views.
Syntax
user-interface
{
first-number1
[
last-number1
] | {
aux
|
vty
}
first-number2
[
last-number2
] }
Views
System view